This 20ft one-trip full side access shipping container is a near-new unit completed a single journey from China — available in one-trip condition rather than the used cargo worthy grade of our 20ft Used Full Side Access Container. Both units share the same 5.82m full-length side door opening with no central post, 8-vent specification, and dual-point access configuration — the distinction is condition. This one-trip unit presents a cleaner interior, near-new floor, and tighter door seals, making it the appropriate choice for buyers requiring a full side access unit for conversion projects, food and retail fit-outs, or clean-substrate applications where a used unit’s service marks and weathering would be a concern.

The 5.82m full-length side door spans the entire long face of the container without a central post — the most accessible side loading configuration available on a standard 20ft footprint. The structural reinforcement required to remove the central post is reflected in the tare weight of 3,120 kg, heavier than a standard unmodified 20ft one-trip unit. Access is provided from two points: the full-length side door and standard double cargo doors at the end — 2.34m wide × 2.28m tall. Factory-fitted lockboxes are standard on all door sets, providing recessed padlock protection on both the side and end openings. Eight vents provide enhanced passive airflow suited to the increased air volume of a frequently accessed open-cycle unit.

The internal width of 2.29m — narrower than a standard unmodified 20ft container (2.35m) — reflects the side door frame depth reducing the usable internal clearance. The floor is 28mm marine-grade plywood on steel cross-members, rated for forklift loading and heavy pallet operations. Confirm maximum gross weight and CSC plate status with JK Shipping LLC before ordering for freight or export use — the structural modification for full side access typically reduces the maximum gross weight from standard ISO specification. For guidance on container siting and permit requirements in the USA, refer to the International Code Council building standards reference.

20ft One-Trip Full Side Access Container — Dimensions & Weight

Standard Inclusions — 20ft One-Trip Full Side Access Container

• One-trip COR-TEN steel 20ft ISO container
• Full-length side door — 5.82m opening, no central post
• Factory-fitted lockbox on side door assembly
• Rear double hinged cargo doors — 2.34m wide × 2.28m tall
• Factory-fitted lockbox on end door assembly
• Multiple locking bars on all doors
• 28mm marine-grade plywood floor — forklift compatible
• 8 vents — passive airflow and condensation control
• ISO corner castings — all eight

What’s Not Included

• Padlock
• Ramps or shelving
• Internal lining or insulation
• CSC plate — confirm with supplier
• Site preparation or foundation
• Local authority permits

Best Use Cases for a 20ft One-Trip Full Side Access Container

• Retail and food conversion projects requiring a clean one-trip full-length open face
• Side loading of wide machinery, vehicles, and industrial equipment
• Construction site materials storage with unobstructed side forklift access
• Pop-up retail and market trading with a full-length customer-facing opening
• Agricultural machinery and large equipment storage
• Logistics staging requiring full side access in a 20ft footprint

Also available in used cargo worthy condition: 20ft Used Full Side Access Container. Also available: 20ft One-Trip Standard Container and 40ft Full Side Access High Cube Container.

Every unit is inspected by JK Shipping LLC prior to dispatch.