This 40ft full side access high cube container is a one-trip near-new unit with the most accessible side opening in our container range — a 38ft 9in (11.84m) full-length side door with no central post. The entire long face of the container opens in a single unobstructed span, allowing machinery, vehicles, long structural materials, and oversized items to be loaded and unloaded from the side without restriction. The absence of a central post — which is required on all standard side-door containers — necessitates substantial structural reinforcement of the roof beam and floor rails, reflected in the tare weight of 6,200 kg — more than 2,200 kg heavier than a standard 40ft high cube unit — confirming the extent of the reinforcement added to maintain structural integrity without the mid-span support column.

The high cube configuration provides an external height of 9ft 6in and an internal height of 8ft 10in (2,698mm), giving full-height side access across the entire 38ft 9in opening — allowing tall plant, vehicles on low loaders, and large-format industrial goods to be driven or craned in from the side without overhead clearance restrictions. The end doors remain as a standard set of double hinged doors at the rear — 7ft 4in wide × 8ft 6in tall — providing a third access point independently of the full side opening. Eight vents provide enhanced passive airflow — double the standard specification — suited to the increased interior volume of this configuration.

An optional steel bunded floor is available as an add-on for buyers intending to store chemical, hazardous, or liquid materials — specify this requirement at time of order and refer to our 40ft Raised Bunded Storage Container for full bunded floor specification details. The standard floor is 28mm marine-grade plywood on steel cross-members. Multiple locking bars are fitted to both the side and end doors for security.

Important — reduced gross weight rating: The structural modification required for the full side opening reduces the maximum gross weight of this unit to 24,000 kg (52,911 lbs) — lower than the standard 40ft high cube maximum of 30,000 kg. Confirm CSC plate status and applicable payload restrictions with JK Shipping LLC before using this unit for international freight. For guidance on container siting and permit requirements in the USA, refer to the International Code Council building standards reference.

40ft Full Side Access High Cube Container — Dimensions & Weight

Standard Inclusions — 40ft Full Side Access High Cube Container

• One-trip COR-TEN steel 40ft high cube frame — structurally reinforced for full side opening
• Full-length side door — 38ft 9in opening, no central post
• Rear end double hinged cargo doors — 7ft 4in wide × 8ft 6in tall
• Multiple locking bars on side and end doors
• 28mm marine-grade plywood floor on steel cross-members
• 8 vents — passive airflow and condensation control
• ISO corner castings — all eight

Available Add-Ons — Specify at Order

• Steel bunded floor — for chemical or hazardous material storage

What’s Not Included

• Padlock
• Ramps or shelving
• Internal lining or insulation
• Site preparation or foundation
• Local authority permits
• CSC plate — confirm with supplier; max gross weight reduced to 24,000 kg

Best Use Cases for a 40ft Full Side Access High Cube Container

• Full-length side loading of vehicles, machinery, and plant equipment
• Long structural materials — steel beams, timber sections, precast panels
• Aircraft parts, boat hulls, and oversized industrial components
• Construction site storage requiring unobstructed side access for forklifts and vehicles
• Agricultural machinery and large equipment storage
• Conversion projects requiring an open structural frame for fit-out

Also available: 40ft One-Trip High Cube Container — Standard, 40ft One-Trip High Cube Container with 4 Side Doors, and 40ft Raised Bunded Storage Container.

Every unit is inspected by JK Shipping LLC prior to dispatch.