This 20ft one-trip open top shipping container is a near-new unit completed a single journey from the factory — clean, corrosion-free, and in like-new structural condition. It is the 20ft equivalent of our 40ft New Open Top Container, providing the same crane-loading capability and removable roof system in a shorter, lighter footprint suited to 20ft logistics operations, tighter site positions, and applications where a 40ft length would be excessive. The open-top configuration replaces the fixed steel roof with removable support bows and a heavy-duty weatherproof tarpaulin cover, allowing direct overhead crane access to the full interior floor area for loading tall, heavy, or irregularly shaped cargo that cannot be manoeuvred through a standard end door opening.

The removable door header at the rear of the container provides additional end-loading clearance — by swinging or removing the door header entirely, cargo taller than the standard 7ft 8in door opening height can be fed in horizontally from the end with additional vertical clearance above the door aperture. Internal lashing rings are fitted to the floor and side rails for cargo securing during transport — confirm the lashing ring count with JK Shipping LLC before ordering if specific tie-down point requirements apply to your cargo. The floor is 28mm marine-grade plywood on a reinforced base structure, rated for heavy industrial and construction cargo. The frame is COR-TEN anti-corrosive weathering steel throughout.

The tarpaulin and support bows are removable for crane loading and can be refitted and secured once cargo is in position to provide weatherproof protection during transport or storage. The open top provides unlimited vertical clearance above the floor deck for crane-loaded cargo — the internal height figure of 7ft 8in (2,330mm) refers to the side wall height above the floor deck, not an enclosed ceiling clearance. Confirm CSC plate status and maximum gross weight with JK Shipping LLC before ordering for international freight use. For guidance on open top container cargo securing requirements, refer to the Bureau International des Containers standards reference.

20ft One-Trip Open Top Container — Dimensions & Specifications

Standard Inclusions — 20ft One-Trip Open Top Container

• One-trip COR-TEN steel 20ft open top ISO frame
• Removable support bows and heavy-duty weatherproof tarpaulin cover
• Removable door header for increased end-loading clearance
• Double swing rear cargo doors with locking bars
• Internal lashing rings — confirm quantity with supplier
• 28mm marine-grade plywood floor on reinforced base structure
• ISO corner castings — all eight

What’s Not Included

• Padlock
• Crane or lifting equipment
• Cargo securing straps, chains, or additional lashing equipment
• CSC plate — confirm with supplier
• Site preparation or foundation
• Local authority permits

Best Use Cases for a 20ft One-Trip Open Top Container

• Crane loading of heavy machinery, industrial equipment, and large components
• Construction and building materials — steel sections, precast panels, and timber
• Agricultural goods and equipment requiring overhead loading
• Irregularly shaped cargo exceeding standard door clearance
• Logistics operations in a 20ft footprint where a 40ft open top is too large
• Project site temporary storage requiring top access

Also available: 40ft New Open Top Container, 20ft One-Trip Standard Container, and 40ft Collapsible Flat Rack Container.

Every unit is inspected by JK Shipping LLC prior to dispatch.