Delivery Information
- Delivery method: Flatbed truck, rollback trailer, or tilt-bed vehicle
- Lead time: 4–10 business days from order confirmation and delivery scheduling
- Delivery cost: $500 flat rate to all 48 continental states, charged at checkout
- Site access required: Minimum 14ft wide access, level ground at placement point,
no overhead obstructions below 14ft - Someone must be on site to accept and sign for delivery
Contact us before ordering to confirm delivery to your location.
📞 +1 (251) 247-6208
📧info@jkshippingllc.com
Hours: Monday to Friday, 8:00 AM – 5:00 PM (CT)
Secure checkout — 256-bit SSL encryption
This portable single toilet unit is a new, purpose-built single-occupancy sanitation facility constructed on a heavy-duty steel frame with fully insulated roof and wall panels, a sealed coated steel-sheet weatherproof roof, and non-slip easy-clean interior surfaces throughout. At 7ft 10in long by 3ft 11in wide, it is the most compact sanitation unit in our range — approximately half the width of our double toilet unit — making it suited to restricted sites, narrow access areas, and locations where only one facility point is required. The unit can be deployed as a stand-alone facility or integrated with an existing building, connecting to utility water, sewer, and power for permanent or semi-permanent installation.
The interior is fitted with a ceramic dual-flush toilet (4.5L full / 3L half flush, average 3.1L per flush), a wall-mounted hand sink with lever tapware rated at 6.0L/min, a toilet roll holder, a wall-mounted toilet brush holder, an LED ceiling light on a wall switch, and a mechanical exhaust fan for odor control and ventilation. The key-lockable steel entry door incorporates integrated ventilation. A rear-mounted mechanical exhaust fan provides additional air movement independent of the door ventilation.
The electrical system includes an IP66-rated external electrical panel with a 2-pole 10A GFCI breaker with test switch. Final electrical connection must be completed on site by a licensed electrician in compliance with applicable National Electrical Code (NEC) requirements. The plumbing system is pre-run and ready for connection to utility water supply and sewer — final connection must be completed on site by a licensed plumber. Confirm that all electrical and plumbing specifications are compatible with US utility supply standards and local code requirements before ordering.
The unit is transported and positioned using forklift pockets and four lifting lugs. For guidance on sanitation facility requirements and plumbing code standards in the USA, refer to the International Plumbing Code reference.
Portable Single Toilet Unit — Dimensions & Weight
| Specification | Imperial | Metric |
|---|
| External Length | 7ft 10in | 2,400mm |
| External Width | 3ft 11in | 1,200mm |
| External Height | 8ft 6in | 2,600mm |
| Weight | approx. 1,750 lbs (est.) | approx. 794 kg (est.) |
Portable Single Toilet Unit — Full Specification
| Item | Specification |
|---|
| Construction | Heavy-duty steel frame, insulated walls and roof, sealed weatherproof roof |
| Transport | Forklift pockets + 4 lifting lugs |
| Door | Key-lockable steel door with integrated ventilation |
| Flooring | Non-slip sealed floor |
| Interior Surfaces | Easy-clean sealed walls and ceiling |
| Toilet | Ceramic dual-flush — 4.5L full / 3L half (avg. 3.1L) |
| Hand Sink | Wall-mounted, lever tapware — 6.0L/min |
| Lighting | LED ceiling light with wall switch |
| Ventilation | Rear-mounted mechanical exhaust fan + door integrated ventilation |
| Accessories | Toilet roll holder, wall-mounted toilet brush holder |
| Electrical Board | IP66-rated external electrical panel — 2-pole 10A GFCI breaker with test switch |
Electrical specification — confirm before you order. The electrical specification for this unit is as supplied to us. Confirm voltage, outlet type and breaker rating with JK Shipping LLC before ordering. Final connection must be made on site by a licensed electrician.
Standard Inclusions — Portable Single Toilet Unit
- Steel-framed insulated structure — sealed weatherproof roof
- Forklift pockets and 4 lifting lugs
- Key-lockable steel door with integrated ventilation
- Non-slip sealed floor and easy-clean wall and ceiling surfaces
- Ceramic dual-flush toilet
- Wall-mounted lever-handle hand sink
- LED ceiling light with wall switch
- Rear-mounted mechanical exhaust fan
- Toilet roll holder and wall-mounted toilet brush holder
- IP66-rated external electrical panel with 2-pole 10A GFCI breaker
What’s Not Included
- Utility electrical connection — licensed electrician required on site
- Utility water supply and sewer drainage connection — licensed plumber required on site
- Site preparation or leveling
- Crane or forklift for positioning — arrange before delivery
- Consumables — soap, paper, cleaning products
- Local building permits or health department approvals
Best Use Cases for a Portable Single Toilet Unit
- Construction and job site sanitation where space is restricted
- Public parks, rest areas, and recreation facilities
- Outdoor events and festivals requiring compact individual facilities
- Disaster relief and remote location deployment
- Commercial premises requiring an additional standalone toilet point
- Building-integrated installation where a full crew restroom unit is not required
Also available: Portable Double Toilet Unit, Portable Accessible Unisex Toilet Unit, and 21ft Office & Break Room Unit.
Every unit is inspected by JK Shipping LLC before it ships.
