This 10ft shipping container with roll-up door is a compact, weatherproof storage unit with a full-width roll-up door on the end face — 7ft 8in wide × 7ft 5in tall — providing a clear, unobstructed opening across the entire internal width of the container for effortless loading and unloading at ground level without requiring a ramp, dock leveller, or threshold ramp. This end-mounted configuration distinguishes this unit from all other roll-up door containers in our range, which feature side-mounted roll-up doors on the long face. The end-mounted layout means the roll-up door is the primary access point replacing the standard swing cargo doors — providing smooth, quick daily access from directly in front of the container rather than from the side.

The roll-up door operates on a vertical retract mechanism — no outward swing clearance required in front of the container, making this unit well suited to tight storage yards, garages, and enclosed positions where a hinged door could not open fully. The container is constructed from industrial-grade corrugated steel — fully sealed and weatherproof against rain, wind, and pest ingress in outdoor conditions. Corner castings are ISO-standard, providing structural support and crane or spreader bar lifting compatibility. Confirm forklift pocket availability with JK Shipping LLC if mechanical repositioning is required.

The floor is 1⅛ inch (approximately 28.6mm) marine-grade plywood — moisture-resistant and rated for heavy equipment, tool chests, and dense material loads. At 10ft external length, this unit provides a compact but practical storage footprint — approximately half the floor area of a standard 20ft container — suited to residential properties, small business sites, and locations where a 20ft unit would be excessive or impractical to position. For guidance on container siting and permit requirements in the USA, refer to the International Code Council building standards reference.

10ft Roll-Up Door Container — Dimensions & Weight

Standard Inclusions — 10ft Roll-Up Door Container

• 10ft corrugated steel container with end-mounted roll-up door
• Full-width roll-up door — 7ft 8in × 7ft 5in opening
• 1⅛in (approx. 28.6mm) marine-grade plywood floor
• ISO-standard corner castings — all eight
• Weatherproof seals — wind, water, and pest resistant

What’s Not Included

• Padlock or locking hardware — confirm lock compatibility with supplier
• Forklift pockets — confirm with supplier
• Lockbox — confirm with supplier
• Ramp — ground-level loading, no ramp needed
• Internal shelving or fittings
• CSC plate — confirm with supplier
• Site preparation or foundation
• Local authority permits

Best Use Cases for a 10ft End Roll-Up Door Container

• Residential garage overflow and garden tool storage
• Job site tool and equipment storage with ground-level front access
• Small business inventory and seasonal stock storage
• Retail seasonal storage requiring daily quick-access entry
• Mobile contractor shed with full-width end opening
• Compact storage in enclosed positions where side-door clearance is unavailable

Also available: 20ft One-Trip Container with 10ft Roll-Up Door, 20ft Cargo Worthy Roll-Up Door Container, and 10ft One-Trip Shipping Container — Green.

Every unit is inspected by JK Shipping LLC prior to dispatch.