Delivery Information
- Delivery method: Flatbed truck, rollback trailer, or tilt-bed vehicle
- Lead time: 4–10 business days from order confirmation and delivery scheduling
- Delivery cost: $500 flat rate to all 48 continental states, charged at checkout
- Site access required: Minimum 14ft wide access, level ground at placement point,
no overhead obstructions below 14ft - Someone must be on site to accept and sign for delivery
Contact us before ordering to confirm delivery to your location.
📞 +1 (251) 247-6208
📧info@jkshippingllc.com
Hours: Monday to Friday, 8:00 AM – 5:00 PM (CT)
Secure checkout — 256-bit SSL encryption
This 10ft x 10ft office container is a square, factory-finished office box rather than a converted shipping container. That distinction matters more than it sounds. A standard ISO container is 8ft wide externally, and once you lose the wall thickness to studs, insulation and drywall you are working with a room barely over 7ft across — wide enough for a desk against one wall and not much else. This unit is 10ft wide, which leaves an internal footprint of roughly 9ft 3in square. That is the difference between a closet with a window and a room two people can work in without turning sideways to pass each other.
Daylight is the other reason to choose this one. Three windows are fitted — 7ft x 3ft, 5ft x 3ft and 2.5ft x 3ft — on separate walls, so the interior gets light from more than one direction and you can cross-ventilate on a mild day instead of running the A/C. Job-site offices with a single small window are miserable to sit in for eight hours; this is not one of those.
The unit arrives finished and wired. Walls and ceiling carry a dual insulation build — a half-inch of spray foam applied directly to the steel to air-seal it and stop thermal bridging, then R12 batt in the stud cavities — and are closed in with pre-finished drywall panels on steel studs with matching trim. The floor is vinyl plank. Climate control is a 2000W baseboard heater on a thermostat plus a 6000 BTU A/C unit, and power runs through a 60-amp panel with an exterior junction box feeding four outlets, one of them dedicated to the A/C, with 4ft LED wrap lights overhead. The personnel door is insulated steel with a lockbox and weatherproof seals.
At around 2,400 lbs gross it is light enough to set with a standard forklift or a small crane and does not need a foundation — a level, compacted pad is enough. It is not an ISO container, so it does not stack in a container yard and it is not intended for freight. Final hookup of the 60-amp panel must be done on site by a licensed electrician. For guidance on siting a temporary structure and what permits you may need, see the International Code Council building standards reference.
10ft x 10ft Office Container — Dimensions & Weight
| Dimension | Imperial | Metric |
|---|
| External Length | 10ft | 3,050mm |
| External Width | 10ft | 3,050mm |
| External Height | 10ft | 3,050mm |
| Internal Length | 9ft 3in | 2,820mm |
| Internal Width | 9ft 3in | 2,820mm |
| Internal Height | 9ft 5in | 2,870mm |
| Door Width | 7ft 8in | 2,340mm |
| Door Height | 7ft 5in | 2,260mm |
| Net Weight | 1,800 lbs | 816 kg |
| Gross Weight | 2,400 lbs | 1,089 kg |
Window Configuration
- 1 x 7ft x 3ft window
- 1 x 5ft x 3ft window
- 1 x 2.5ft x 3ft window
What’s Included
- Insulated steel personnel door with lockbox, hardware and weatherproof seals
- Half-inch spray foam plus R12 batt insulation — walls and ceiling
- Steel stud framing with pre-finished drywall panels and matching trim
- Vinyl plank flooring
- 60-amp electrical panel with exterior junction box
- Four power outlets, including a dedicated A/C outlet
- 4ft LED wrap lights
- 2000W baseboard heater with thermostat
- 6000 BTU A/C unit
Electrical specification — confirm before you order. The electrical specification for this unit is as supplied to us. Confirm voltage, outlet type and breaker rating with JK Shipping LLC before ordering. Final connection must be made on site by a licensed electrician.
What’s Not Included
- Final electrical hookup — a licensed electrician must connect the 60-amp panel on site
- Desks, chairs, or any furniture
- Data or communications cabling
- Site preparation, pad, or foundation
- Local building and zoning permits
Best Use Cases for a 10ft x 10ft Office Container
- Job-site office for a superintendent and one other person, where an 8ft-wide unit is too tight
- Gate house or security station that needs sightlines in more than one direction
- Backyard office or studio that has to be comfortable year-round, not just in spring
- Scale house, weigh station, or dispatch office on an aggregate or logistics yard
- Event, ticket, or registration booth needing a finished interior a customer will see
If you want the same unit specified around its 60-amp turnkey electrical package, see our 10ft x 10ft High Cube Mobile Office Container. For a larger footprint, compare the 20ft Ground Level Office Container and the 20ft x 12ft Container Office Building.
Every unit is inspected by JK Shipping LLC before it ships. Flat-rate delivery is $500 anywhere we ship in the US; allow 1–3 business days handling and 3–7 days in transit. Questions on spec or site access: call +1 (251) 247-6208, Monday to Friday, 8:00 AM – 5:00 PM CT.
Reviews
There are no reviews yet.