20ft One-Trip High Cube Container — Side Sliding Door, IBC Tank Storage, CSC Plate (New)

This 20ft one-trip high cube container with side sliding door is a new, near-new condition unit purpose-configured for the storage of IBC tanks (Intermediate Bulk Containers) and other large industrial vessels — accommodating up to 16 × 1,000-liter IBC tanks within the standard 20ft footprint. The 9ft 6in high cube profile provides the additional internal height required to load and position full-height IBC tanks — typically 1,160mm tall — with sufficient clearance above for forklift tine maneuver and stack positioning, without the overhead restriction of a standard 8ft 6in container.

The access configuration features two independent door openings on different faces: a sliding door on the 20ft side for wide lateral access to the full interior length, and standard double-hinged cargo doors at the 8ft end for conventional end loading. The side sliding door moves horizontally along a track — requiring no vertical clearance above like a roller shutter and no outward swing clearance like a hinged door — making it well suited to warehouse and factory environments where overhead or adjacent obstructions limit door type options. Both door openings are fitted with two locking bars each and factory-fitted lockboxes for secure closure. Sliding door opening dimensions are not confirmed — verify the exact width and height with JK Shipping LLC before ordering if IBC forklift access clearance through the side door is a critical requirement.

The container carries a valid CSC plate certifying it for international shipping use at a maximum gross weight of 30 metric tons — meaning the unit retains its freight certification for transport or export operations in addition to static storage use. The floor is 28mm marine-grade plywood on steel cross-members, providing a load-rated base for heavy IBC tank loads distributed across the full floor area. Two forklift pockets on each side allow repositioning of the loaded unit without requiring manual unloading first. Four vents provide passive airflow to manage condensation.

For guidance on IBC tank storage regulatory requirements in the USA, refer to EPA SPCC regulations if the tanks contain oil or hazardous liquids, and confirm secondary containment requirements with your environmental compliance officer before siting.

20ft One-Trip High Cube Sliding Door Container — Dimensions

Standard Inclusions — 20ft One-Trip High Cube Sliding Door Container

• One-trip COR-TEN steel 20ft high cube ISO container
• Side sliding door on the 20ft face — two locking bars and factory-fitted lockbox
• Rear double-hinged cargo doors — two locking bars and factory-fitted lockbox
• Valid CSC plate — certified to 30 metric ton maximum gross weight
• 28mm marine-grade plywood floor on steel cross-members
• 4 vents — passive airflow and condensation control
• 2 forklift pockets per side — 4 total
• ISO corner castings — all eight

What’s Not Included

• Padlock
• IBC tanks or contents
• Secondary containment bunding — see our 40ft Raised Bunded Storage Container if secondary containment is required
• Site preparation or foundation
• Local building department or environmental permits

Best Use Cases for a 20ft High Cube Sliding Door Container

• IBC tank storage — up to 16 × 1,000-liter bulk liquid containers
• Industrial chemical, lubricant, and liquid storage requiring height clearance
• Warehouse and factory storage where overhead constraints prevent roller shutter use
• Construction and civil site storage for tall equipment and bulk materials
• International freight operations — CSC plate valid to 30 metric tons gross
• General high-volume storage requiring both side and end access

Also available: 20ft Full Side Access Shipping Container, 40ft Raised Bunded Storage Container, and 40ft One-Trip High Cube Container.

Every unit is inspected by JK Shipping LLC before it ships.